AM26C32CN

The AM26C32CN is a quadruple differential Line Receiver for balanced or unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design specifies that if the inputs are open, the outputs always are high. The AM26C32 device is manufactured using a BiCMOS process, which is a combination of bipolar and CMOS transistors. This process provides the high voltage and current of bipolar with the low power of CMOS to reduce the power consumption to about one-fifth that of the standard AM26LS32, while maintaining AC and DC performance.

• Meets/exceeds requirements of ANSI TIA/EIA-422-B, TIA/EIA-423-B & ITU recommendation V.10/V.11
• 10mA Typical low power
• ±7V Common-mode range with ±200mV sensitivity
• 60mV Typical input hysteresis
• 3 State outputs
• Input fail-safe circuitry
• Available in Q-Temp automotive
• 17ns Typical tpd
• 2kV ESD
• 10Mbps Signalling rate

Applications

Automotive, Motor Drive & Control, Sensing & Instrumentation, Consumer Electronics, Test & Measurement

Warnings

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.