You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.

Product may not be an exact match for your search

You previously purchased this product. View in Order History

 
 

TPS92692EVM-880

Evaluation Module, Boost & Boost to Battery LED Driver, Power String of Series LED's, PWM Dimming

TEXAS INSTRUMENTS TPS92692EVM-880
×
×

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
TPS92692EVM-880
Order Code:
3125244

Product Overview

The TPS92692EVM-880 from Texas Instruments is a TPS92692-Q1 boost and boost to battery LED driver evaluation module. It is fully assembled and tested LED driver that can be configured as either a boost or a boost to battery topology to power a single string of series connected LEDs. Accurate closed-loop LED current regulation is achieved using a low offset rail to rail current sense amplifier along with high side current-sensing implementations. DC LED current set point can be varied over a 15:1 ratio using high-impedance analogue adjust (IADJ) input. PWM dimming of LED current is achieved by directly modulating the PWM/DIM input pin with the desired duty cycle or by enabling the internal PWM generator circuit. Optional PDRV gate driver output can be used to drive an external P-Channel series MOSFET. It supports continuous LED status check through the current monitor (IMON) output. Includes open drain fault indicator output to indicate LED output overvoltage & undervoltage conditions.
  • Versatile LED driver capable of driving a string of 1 to 20 series-connected white LEDs
  • Wide input voltage range of 4.5V to 18V
  • Better than ±4% LED current regulation using a high-side current sense resistor
  • Spread spectrum frequency modulation for improved EMC
  • Internal analogue voltage to PWM duty cycle generator for stand-alone dimming operation
  • Supports boost, buck-boost (boost to battery), SEPIC and flyback LED driver topologies
  • Supports automotive start-stop and load dump transients up to 65Vmax

Applications

Lighting

Product Information

Want to see similar products? Simply select your required attributes below and hit the button ×


:
Boost (Step Up)

:
1Outputs

:
350mA

:
40V

:
4.5V

:
18V

:
TPS92692

:
PWM

:
Eval Board TPS92692

:
-

Find similar products Choose and modify the attributes above to find similar products.

Technical Documents (0)

CAD Downloads

×

Terms and Conditions

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

Accept Cancel

7 In stock Need more?

More stock available week commencing 31/03/25
Standard lead time for this product is 105 weeks.

Order before 6pm

With you next business day

Due to market conditions delivery times are for general guidance only and may be subject to change at short notice

€83.80

Pricing is unavailable. Please contact customer services.

Price for:
Each
Multiple: 1 Minimum: 1
Quantity Price Your Price
 
 
1+ €83.80
Promotional price
Contract Price
Web only price
Web only contract price
 
 
 

Pricing is unavailable. Please contact customer services.

No longer stocked:: No Longer Manufactured::
Add to Basket Add to Basket Pre-Order
Add
Restricted Item
Enter Your Part No/Line Note
Total Price:
Total Price: ( )
Total Price: --