You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
DSPIC30F6010A-30I/PT
Digital Signal Controller, dsPIC30F, 40 MHz, 144 KB, 68 I/O's, CAN, I2C, SPI, UART, 5.5 V
Date/Lot Code
- Manufacturer:
- MICROCHIP MICROCHIP
- Manufacturer Part No:
- DSPIC30F6010A-30I/PT
- Order Code:
- 1332032
- Product Range
- dsPIC30F
- Technical Datasheet:
- DSPIC30F6010A-30I/PT Datasheet
Product Range Selector (dsPIC30F)
See all from this product rangeProduct Overview
The DSPIC30F6010A-30I/PT is a 16-bit high-performance Digital Signal Controller features CPU core has a 24-bit instruction word. The Program Counter (PC) is 23-bit wide with the least significant bit (LSb) always clear and the most significant bit (MSb) is ignored during normal program execution, except for certain specialized instructions. Thus, the PC can address up to 4M instruction words of user program space. An instruction prefetch mechanism is used to help maintain throughput. Program loop constructs, free from loop count management overhead, are supported using the DO and REPEAT instructions, both of which are interruptible at any point.
- Modified Harvard architecture
- C-compiler optimized instruction set architecture
- 84 base instructions with flexible addressing modes
- 24-bit wide instructions, 16-bit wide data path
- 16 x 16-bit working register array modes
- DSP engine - Modulo and bit-reversed addressing modes
- Peripheral features - 3-wire SPI™ modules
- Motor control PWM module - Complementary or independent output modes
- Quadrature encoder interface module - 16-bit up/down position counter
- 10-bit 1MSPS analogue-to-digital converter (A/D)
- Enhanced flash program memory - 10,000 erase/write cycle (minimum)
- Data EEPROM memory - 100000 erase/write cycle (minimum)
- Self-reprogrammable under software control
- Power-on reset (POR), power-up timer (PWRT) and oscillator start-up timer (OST)
- Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
- Fail-safe clock monitor operation
- Detects clock failure and switches to on-chip low power RC oscillator
- Programmable code protection
- In-Circuit Serial Programming™ (ICSP™)
- Programmable brown-out detection and reset generation
Applications
Industrial, Power Management, Motor Drive & Control, Automotive
Warnings
ESD sensitive device, take proper precaution while handling the device.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- dsPIC30F
- :
- 40MHz
- :
- 144KB
- :
- 68I/O's
- :
- CAN, I2C, SPI, UART
- :
- 5.5V
- :
- TQFP
- :
- 80Pins
- :
- 4.5V
- :
- 5.5V
- :
- -40°C
- :
- 85°C
- :
- MSL 3 - 168 hours
Technical Documents (3)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Available to manufacturer lead time 51 weeks
Non-Cancellable / Non Returnable
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
€14.50
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 119 Minimum: 119
Total Price:
Total Price: ( )
Total Price: --
Filter Tool