Low

SN74AVC2T45DCUT - 

Transceiver, 74AVC2T245, 1.2 V to 3.6 V, VSSOP-8

TEXAS INSTRUMENTS SN74AVC2T45DCUT

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
SN74AVC2T45DCUT
Order Code:
1053505RL
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
74AVC
:
-40°C
:
85°C
:
8Pins
:
VSSOP
:
742T245
:
-
:
-
:
1.2V
:
Transceiver, Non Inverting
:
74AVC2T245
:
Cut Tape
:
3.6V
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The SN74AVC2T45DCUT is a dual-bit dual supply Bus Transceiver with configurable voltage translation and 3-state outputs. This 2-bit non-inverting bus transceiver uses two separate configurable power-supply rails. The A ports are designed to track VCCA and accepts any supply voltage from 1.2 to 3.6V. The B ports are designed to track VCCB and accept any supply voltage from 1.2 to 3.6V. This allows for universal low-voltage bidirectional translation and level-shifting between any of the 1.2/1.5/1.8/2.5/3.3V voltage nodes. The logic levels of the direction-control input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess leakage current on the internal CMOS structure.
  • Designed for asynchronous communication between two data buses
  • VCC Isolation
  • Partial-power-down mode operation
  • Latch-up performance exceeds 100mA per JESD 78, class II
  • ESD protection exceeds JESD 22
  • Green product and no Sb/Br

Applications

Industrial, Automation & Process Control, Signal Processing, Consumer Electronics, Communications & Networking, Computers & Computer Peripherals, Portable Devices

Associated Products

Compare Selected